Hayes-microcomputer-products PC Card Manual do Utilizador descarregar pdf (Página 36)

DIVA T/A PC Card Reference Guide 36

COM Port Configuration Commands—Continued

Command Description

AT%MT2=n Set Turbo Mode Threshold: Specifies the

minimum PC bitrate threshold for the

activation of turbo mode.

n=a value in the range 57,600 to 115,200

Default=115200

ATQn Quiet Result Codes: This command enables or

disables the sending of result codes to the DTE.

n=0

Enables result codes to the DTE (default).

n=1

Disables result codes to the DTE.

ATS2=n Escape Character: Use this command to

configure the character used to escape from the

data mode and return to the AT command

mode.

n can be a value between 0-255 (default is

ASCII 043, translates into the “+” character).

A value of 128-255 disables the escape

function.

ATS3=n Carriage Return Character: Sets the

character that the AT command processor uses

to detect the end of a command line in both the

receive and transmit directions.

n can be a value between 0-127(default is

ASCII 013 which translates into the carriage

return character).

ATS4=n Line Feed Character: Sets the character that

the AT command processor uses to indicate the

end of each status message.

n can be a value between 0-127 (default is

ASCII 010 line feed).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 56 57

Sem comentários

Hayes-microcomputer-products PC Card Manual do Utilizador Página 36